TP&N and four pole switch incoming kits to suit Protek three phase ‘B’ type boards.Kit Features63A-250ATP&N or four poleFace plate providedLinks providedShields providedInstruction providedCable box supplied with switches 160A+Metal IP3X enclosurePowder coated epoxy finish RAL7035Open gland ..
Three and four pole switch incoming kits designed to suit Proteks MCHD 400A range of panel boards. Kits are designed to fit internally with cable entry at the bottom of the board. Cable boxes are available from stock should they be required.Kit Features160A-400AThree or four poleFace plate providedL..
3 pole ‘C’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 400V AC3 Pole 3 Module ‘C’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
3 pole ‘D’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 400V AC3 Pole 3 Module ‘D’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
A range of enclosed, 160A, 200A and 250A MCCB outgoing kits supplied in single, double or triple configurations. Kits are designed to be bolted on to the top of the MCHD 400A range of panel boards offering contractors the opportunity to use MCCBs rated above 125A E160 frame.Kit Features1, 2 or 3 enc..
Designed in the UK to BS5486 Part 13: 1989Assembled in the UK to BSEN 61439Degree of protection IP65 to BSEN 60529Base ABS, Lid Polystyrol (both flame retardant)Load break & load makeWall mountableHandle pad-lockable in OFF positionOne size of enclosureGasket-less sealNo need to remove handle to..
1 pole ‘B’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC1 Pole 1 Module ‘B’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
1 pole ‘C’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC1 Pole 1 Module ‘C’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
2 pole 2 module 100mA time delay (Si) RCDs for use with 35mm DIN rail. Compatible with all Protek enclosures.Current type - ACScrew terminal clampTime delay (Si)2 Pole Rated voltage - 230VPositive contact indicationMax cable 25 Strand / 35 solid..
2 pole 2 module 30mA RCDs for use with 35mm DIN rail. Compatible with all Protek enclosuresCurrent type - ACScrew terminal clampPositive contact indication2 Pole Rated voltage - 110VMax cable 25 Strand / 35 Solid ..
Compact TP&N or 4 pole metal IP65 rotary fused switches. Designed and built in the UK to BSEN 61439.Enclosure SpecificationSheet steel (EN 10130 DC01)Body : 1.2 / 1.5 mmDoor : 1.2 / 1.5 mmRAL 7035w powder coatingGalvanized steel (EN 10346 DX51D+Z)Mounting plate : 1.5 - 2 mmIP65 Rated enclosure (..