Model: ROT480IP
Designed in the UK to BS5486 Part 13: 1989Assembled in the UK to BSEN 61439Degree of protection IP65 to BSEN 60529Base ABS, Lid Polystyrol (both flame retardant)Load break & load makeWall mountableHandle pad-lockable in OFF positionOne size of enclosureGasket-less sealNo need to remove handle to..
£45.37
Model: MC8KM-8004S
Three and four pole MCCB incoming kits designed to suit Proteks MC 800A range of panel boards. Kits are designed to fit internally with cable entry at the bottom of the board. Cable boxes are available from stock should they be required.Kit Features630 or 800AThree or four poleFace plate providedLin..
£1,885.43
Model: HDMCB-STAUX
..
£7.18
Model: MC1P100TS
Outgoing MCCBs for use with Protek 125A, 400A and 800A MCCB panel boards. Please see table for guidance on product compatibility.1 Pole 16A-125A MCCBsE160 Frame sizeInstructions provided10 current ratings 16A-125ASingle pole 25mm widthTerminal clamp style connection50mm2 cable (For guidance only)..
£85.85
Model: MC3P250TS
Outgoing MCCBs for use with Protek 125A, 400A and 800A MCCB panel boards. Please see table for guidance on product compatibility.3 Pole 25A-125A MCCBsE160 Frame sizeInstructions provided6 current ratings 25A-125AThree pole 75mm widthFixed thermal adjustment 80% or 63%Terminal clamp style connection5..
£303.26
Model: MC4P250TS
4 Pole MCCBs for use in bespoke projects. Not suitable for use as outgoers with Protek panel boards4 Pole 25A-160A MCCBs7 current ratings 25A-160AE160 Frame sizeInstructions providedFixed thermal adjustment 80% or 63%Terminal or lug style connection16.5mm Palm25A-40A 5mm bolt63A-160A 8mm bolt4 Pole ..
£430.01
Model: HDMCB-1B25
1 pole ‘B’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC1 Pole 1 Module ‘B’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
£3.69
Model: HDMCB-1C25
1 pole ‘C’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC1 Pole 1 Module ‘C’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
£3.69
Model: HDMCB-1D25
1 pole ‘D’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC1 Pole 1 Module ‘D’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
£4.50
Model: HDMCB-2C25
2 pole ‘C’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC2 Pole 2 Module ‘C’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
£7.31
Model: HDMCB-2D25
2 pole ‘D’ curve 10kA MCBs designed to fit all current Protek enclosures, consumer units and ‘A’ and ‘B’ boards.FeaturesVoltage - 230V AC2 Pole 2 Module ‘D’ Curve 10kAAccepts cables up to 25mmScrew terminal clampClip-in designPositive trip indicationAvailable from stock ..
£7.92
Model: DBC6-400
Direct connection plates for use with 630A busbar chambers.Designed to be used with cable up to 400mm2. Please note: LUGS are NOT supplied with this product...
£39.19